Bemix SP40 1000 kg
Information
Bemix SP40 is a cement that is specially designed for dry spraying. The concrete is based on a low-alkaline and sulfate-resistant cement and well-graded ballast. Good frost resistance. For repairs where minimum shrinkage and cracking is a requirement. Cladding in tunnels, reinforcement of pillars, beams, quays and other concrete structures.
Product data
|
Article number |
1100800 |
|
Weight |
25 kg |
|
Product category |
Spray concrete |
|
Function |
Spray concrete |
|
Processable minutes |
– |
|
Compression strength in MPa |
65 |
|
Layer thickness in mm |
unreinforced 20–70 |
|
Consumption kg/m2/cm |
25–30 including rebound |
|
Water quantity litres/1000 kg |
100 |
|
1 kg dry mortar = finished concrete in litres |
– |
|
Waterproof |
– |
Instructions
Pre-treatment:
Damaged concrete or rock is removed mechanically. Oil and other contaminants are removed with a cleaning agent. Final cleaning is done with the correct quantity of water. Very rough surfaces give the best adhesion. The surface should dry enough to be slightly absorbent when spraying.
Mixing and application:
Intended for the dry spraying method. Mixed and sprayed with appropriate equipment. Professional experience and knowledge of spraying concrete is needed. Always use clean water. Winter measures should be taken below 5°C.
Download documents
Do you need help?
